【法规名称】
【颁布时间】 2002-06-03
【法规编号】 43340 什么是编号？
【正 文】
第3页 MUTUAL RECOGNITION OF NATIONAL MEASUREMENT STANDARDS AND OF CALIBRATION AND MEASUREMENT CERTIFICATES ISSUED BY NATIONAL METROLOGY INSTITUTES
|
[接上页] 6.3 Participation in RMO supplementary comparisons is open to t-hose institutes meeting the requirements specified in pargr-aph 6.2. 7 Confidence in measurements 7.1 Confidence in measurements is an essential prerequiste tointernational trade and facilitates almost every task in theindustrialized world. To a large extent this confidence alr-eady exists and is based on the SI, which is the cornerst o-ne of the international measurement system, as realizsed bythe national metrology institutes. The function of this mut-ual recognition arrangement is to extend and consolidate pre-existing worldwide confidence in measurements. 7.2 Institutes participating in this arrangement are expected toextend existing international confidence in teir activitiesby publishing regular reports on the work of their laborato-ries and transmitting them to the BIPM, by participation inrelevant conferences, and by taking part in the activitiesorganized by the BIPM. 7.3 In addition to participation in the key and supplementary c-omparisons, identified in paragraph 6, recognition of calib-ration and measurement certificates requires one of the fol-lowing procedures in order to establish the necessary mutualconfidence: a) an NMI that chooses for its calibration and measurementservices a quality system that meets the requirements of ISO Guide 25 or equivalent for an NMI, assessd by an acc- reditation body fulfilling the requirements of ISO Guide 58, declares its calibration measurement capabilities (s- ee paragraph T.7) and submits them to the local RMo for review and transmission to the Joint Committee for analy- sis and inclusion in Appendix C; b) an NMI that chooses to use a different way of assuring q-uality or chooses a different quality system, or ISO Gui- de 25 without third - party assessment, for its calibrat- ion and measurement service declares its calibration mea- surement capabilities (see paragraph T.7) and submits th- em to the local RMO for review and transmission to the J- oint Committee for analysis and inclusion in Appendix C. Demonstration of competence and capability may reuqire visi-ts and examination of procedures by an NMI and/or by peersselected by the local RMO. 7.4 Nothing in this arrangement is intended to limit the freedomof one or more signatories to establish mutual recognition,as specified in paragraphs 2.1 and 2.2, outside this arrang-ement. 8 Disputes in the operation of the arrangement This arrangement is operated by the BIPM in close consultationwith the Consultative committees and the RMOs whose responsib-ility it is, under paragraphs 4 and 5 above, to carry out andevaluate the results of the key comparisons. Disagreements th-at arise in the operation of this arrangement are discussed f-irst within the appropriate Consultative Committee, the RMO orthe Joint Committee and if not resolved there, are referred toteh CIPM. 9 Coordination 9.1 Overall coordination of activities related to this arrangem-ent resides with the CIPM. 9.2 Coordination of the key comparisons is effected through con-sultations between the Consultative Committees and the RMO's. 9.3 Coordination of the supplementary comparisons and other act-ions related to confidence in calibration and measurement c-ertificates undertaken by the regional metrology organizati-ons is carried out by the JCRB. The JCRB is created by the CIPM comprising representatives of the RMOs and is chaired bythe Director of the BIPM, Its terms of reference are givenin Appendix E. 9.4 Under the overall responsbility of the CIPM, the Joint Comm-ittee is responsible for analysing and maintaining the cont-ent of Appendix C. 10 Responsibility and liability for measurements 10.1 It is recognized and accepted by each signatory that thisarrangement cregtes no rights, liabilities or obligations that will have binding effects in national or internationallaw. 10.2 It is recognized and accepted by each signatory that thisarrangement covers, in each country, only the signatory in-stitute and other institutes represented by it It dose notnecessarilyextend to other metrological or regulatory bodi-es in that country. 10.3 Rsponsbility for all measurements made under this arrangem-ent rests wholly with the institute making the measurement-s. No responsibility for declared uncertainties of statmen-ts of quality is assumed by the CIPM, the BIPM, the Consul-tative Committees or the RMOs. 11 Signing this mutual recognition arrangement and bringing itinto force 11.1 The procedure for implementing this arrangement is as foll-ows: ．at the meeting of directors of national metrology instit-utes held on 23-25 February 1998, the directors were inv- ited to initial a draft of this arrangement. ．at the meeting of directors of national metrology instit-utes to be held at the time of the 21st CGPm in October 1 999, dircetors will be invited to sign this arrangment f- or an initial period of four years. New signatories may attach themselves to this arrangementatany time by application to the Director of the BIPM. |
- 此法规有错误，我来纠正。请点击在此 提交错误内容或者您纠正的内容！