【法规名称】
【法规编号】 61564 什么是编号？
【正 文】
第3页 CAP 313B SHIPPING AND PORT CONTROL (CARGO HANDLING) REGULATIONS
|
[接上页] (2) Paragraph (1) shall apply to beams used for hatch coverings as it applies to hatch coverings. Cap 313B reg 12 Maintenance of hatch coverings and beams All beams used for hatch coverings, and all hatch coverings, shall be maintained in good condition. Cap 313B reg 13 Hand grips and locking devices on hatch coverings and hatch beams (1) Adequate hand grips shall be provided on all hatch coverings, having regard to their size and weight, unless the construction of the hatch or the hatch coverings is of a character rendering the provision of hand grips unnecessary. (2) All beams used for hatch coverings, and all hatch coverings of a type that do not require hatch beams for support, shall be fitted with adequate locking devices to prevent their displacement by a passing load or in any other circumstances. Cap 313B reg 14 Safety in removing and replacing beams Where the working space around a hatch is less than 600 mm wide, such provision shall be made as will enable persons employed to remove and replace in safety all beams used for hatch coverings and all hatch coverings. Cap 313B reg 15 Power operated hatch coverings and hull doors (1) Power operated hatch coverings shall not be operated, opened or closed by any person other than a competent person or whilst any person is liable to be injured by the hatch coverings during any such process. (2) Paragraph (1) shall also apply to any power operated door in the hull of a vessel, ramp, retractable deck or similar ship's equipment. Cap 313B reg 16 Duty to comply with this Part PART III LIFTING APPLIANCES AND LIFTING GEAR It shall be the duty of the owner of a lifting appliance or lifting gear, and in the case of a lifting appliance or lifting gear carried on board a vessel it shall also be the duty of the master of the vessel, to comply with this Part. Cap 313B reg 17 Safe lifting appliances and gear No lifting appliance or lifting gear shall be used for hoisting or lowering unless- (a) it is of good mechanical construction and design, made of strong and sound materials, and free from patent defect; (b) it is properly maintained in safe working condition and is properly installed and rigged for use in a safe and proper manner; (c) in the case of a lifting appliance, the arrangements for fixing and anchoring the lifting appliance are adequate to secure its safety; and (d) in the case of a derrick, adequate measures are taken to prevent the foot of the derrick being accidentally lifted out of its socket or support. Cap 313B reg 18 Markings on lifting gear (1) Every grab, lifting beam, lifting frame, vacuum lifting or magnetic lifting device which does not form an integral part of a lifting appliance shall be clearly marked with its own weight. (2) All markings required under this regulation shall be readily legible and done in such a manner that they shall not affect the strength of the gear or appliance. Cap 313B reg 19 Prohibitions regarding lifting gear (1) No item of lifting gear made of wrought iron or having any part made of wrought iron shall be used in cargo handling. (2) No heat treatment shall be applied to any item of lifting gear made of steel or having any part made of steel unless the treatment is carried out under the supervision of a competent person and in accordance with his requirements. Cap 313B reg 20 Testing and examination of lifting appliances (1) Before being taken into use and after any substantial alteration or repair to any stress-bearing part, all lifting appliances shall have been tested and examined by a competent examiner. (2) After being taken into use- (a) all derricks and permanent attachments, including bridle chains, to the derrick, mast and deck, used in hoisting or lowering shall be inspected by a competent person once at least in every 12 months and be thoroughly examined by a competent examiner once at least in every 4 years; (b) all other lifting appliances shall be thoroughly examined by a competent examiner once at least in every 12 months. Cap 313B reg 21 Testing of lifting gear (1) Subject to paragraph (3), no chain, ring, hook, shackle, swivel or pulley block shall be used in hoisting or lowering unless it has been tested and examined by a competent examiner. (2) Where the Director is of opinion that, owing to the size, design, material or infrequency of use of any gear or class of gear specified in this regulation the requirement of this regulation as to testing and examination is not necessary for the protection of persons employed, he may by certificate in writing (which he may at his discretion revoke) exempt such gear or class of gear from such requirement subject to such conditions as may be specified in the certificate. (3) All chains, other than bridle chains attached to derricks or masts, and all rings, hooks, shackles, swivels and pulley blocks shall be thoroughly examined by a competent examiner once at least in every 12 months and shall be inspected by a competent person immediately before each occasion on which they are used in hoisting or lowering, unless they have been inspected within the preceding 3 months. |
- 此法规有错误，我来纠正。请点击在此 提交错误内容或者您纠正的内容！