【法规名称】
【法规编号】 68853 什么是编号？
【正 文】
第7页 CAP 374F ROAD TRAFFIC (SAFETY EQUIPMENT) REGULATIONS
|
[接上页] (f) Australian Design Rule 5A or 5B; (g) Directive 76/115/EEC, as amended by 82/318/EEC, issued by the European Economic Community; (L.N. 37 of 1989) (h) Technical Standard for Seat Belt Anchorages and Type Approval Test Procedures (TRIAS) 37-1987made by the Minister of Land, Infrastructure and Transport of Japan for motor vehicle in Circular of Jisha No. 899 of 1 October 1983 and Circular of Kinshin No. 453 of 24 August 1971 including all revisions of that standard and test procedures made before the date this paragraph comes into operation. (L.N. 148 of 2002) (L.N. 148 of 2002) PART III Seats with Integral Seat Belt Anchorages for Vehicles other than Public Light Buses Registered on or after Specified Date (L.N. 148 of 2002) (a) British Standard for seats with Integral Seat Belt Anchorages B.S. AU140:1967 (b) British Standard for seats with Integral Seat Belt Anchorages B.S. AU140a (c) E.C.E. Regulation No. 14, including Revision 1, made by the Economic Commission for Europe dated 30 January 1970 and published by the United Nations; (d) Australian Design Rule 5A or 5B; (e) (i) Technical Standard for Seats and Seat Anchorages and Type Approval Test Procedures (TRIAS) 35-1975; and (ii) Technical Standard for Seat Belt Anchorages and Type Approval Test Procedures (TRIAS) 37-1987, made by the Minister of Land, Infrastructure and Transport of Japan for motor vehicle in Circular of Jisha No. 899 of 1 October 1983 and Circular of Kinshin No. 453 of 24 August 1971 including all revisions of those standards and test procedures made before the date this paragraph comes into operation. (L.N. 148 of 2002) (L.N. 148 of 2002) PART IIIA Seats with Integral Seat Belt Anchorages for Public Light Buses Registered on or after Specified Date (a) ECE Regulation No. 14 made by the Economic Commission for Europe dated 1 April 1970 (E/ECE/324-E/ECE/TRANS/505/Rev. 1/Add. 13) including all revisions for vehicles with regard to safety belt anchorage made before the date this paragraph comes into operation; (b) Directive 76/115/EEC issued by the European Economic Community dated 18 December 1975 including all revisions for anchorages for motor-vehicle safety belts made before the date this paragraph comes into operation; (c) (i) Technical Standard for Seats and Seat Anchorages and Type Approval Test Procedures (TRIAS) 35-1975; and (ii) Technical Standard for Seat Belt Anchorages and Type Approval Test Procedures (TRIAS) 37-1987, made by the Minister of Land, Infrastructure and Transport of Japan for motor vehicle in Circular of Jisha No. 899 of 1 October 1983 and Circular of Kinshin No. 453 of 24 August 1971 including all revisions of those standards and test procedures made before the date this paragraph comes into operation;(d) Australian Design Rule 5/04 approved in Road Vehicle (National Standards) Determination No. 2 of 1997 (Australia) including all revisions for anchorages for seat belt made before the date this paragraph comes into operation. (L.N. 148 of 2002) PART IV Approved Anchorage Points for Goods Vehicles (a) E.C.E. Regulation No. 14, including Revision 1, made by the Economic Commission for Europe dated 30 January 1970 and published by the United Nations; (b) Australian Design Rule 32A; (c) Directive 76/115/EEC of the European Economic Community, including amendment 82/318/EEC by the same authority; (d) Technical Standard for Seat Belt Anchorages and Type Approval Test Procedures (TRIAS) 37-1987 made by the Minister of Land, Infrastructure and Transport of Japan for motor vehicle in Circular of Jisha No. 899 of 1 October 1983 and Circular of Kinshin No. 453 of 24 August 1971 including all revisions of that standard and test procedures made before the date this paragraph comes into operation. (L.N. 148 of 2002) (L.N. 37 of 1989; L.N. 148 of 2002) PART V Approved Anchorage Points for Public Light Buses Registered on or after Specified Date (a) ECE Regulation No. 14 made by the Economic Commission for Europe dated 1 April 1970 (E/ECE/324-E/ECE/TRANS/505/Rev. 1/Add. 13) including all revisions for vehicles with regard to safety belt anchorage made before the date this paragraph comes into operation; (b) Directive 76/115/EEC issued by the European Economic Community dated 18 December 1975 including all revisions for anchorages for motor-vehicle safety belts made before the date this paragraph comes into operation; (c) Technical Standard for Seat Belt Anchorages and Type Approval Test Procedures (TRIAS) 37-1987 made by the Minister of Land, Infrastructure and Transport of Japan for motor vehicle in Circular of Jisha No. 899 of 1 October 1983 and Circular of Kinshin No. 453 of 24 August 1971 including all revisions of that standard and test procedures made before the date this paragraph comes into operation; (d) Federal Motor Vehicle Safety Standard No. 210 of Federal Regulations Vol. 36 No. 232 of USA dated 2 December 1971 including all revisions for seat belt assembly anchorages made before the date this paragraph comes into operation; (e) Australian Design Rule 5/04 approved in Road Vehicle (National Standards) Determination No. 2 of 1997 (Australia) including all revisions for anchorages for seat belt made before the date this paragraph comes into operation. (L.N. 148 of 2002) |
- 此法规有错误，我来纠正。请点击在此 提交错误内容或者您纠正的内容！