【法规名称】
【法规编号】 68863 什么是编号？
【正 文】
第12页 CAP 374A ROAD TRAFFIC (CONSTRUCTION AND MAINTENANCE OF VEHICLES) REGULATIONS
|
[接上页] "type of structure" (结构类型), in relation to a tyre, means a type of structure of a tyre of a kind as defined in this paragraph. Cap 374A reg 23 Steering The steering mechanism of a vehicle shall be so constructed or arranged that no overlock shall be possible and that the wheels shall not in any circumstances foul any part of the vehicle. Cap 374A reg 24 Speed indicators (1) Every motor vehicle, other than a motor vehicle which it is at all times unlawful to drive at a speed exceeding 20 kilometres per hour and an invalid carriage, shall be fitted with an efficient speedometer which shall be- (a) so placed that it can be easily read by the driver; (b) maintained in good working order; (c) kept free from any obstruction which might prevent it from being easily read by the driver; (d) calibrated and marked so as to indicate clearly the speed at which the motor vehicle is being driven; and (e) capable of indicating the speed within a margin of accuracy of plus or minus 10 per cent if and when the motor vehicle is being driven at a speed in excess of 15 kilometres per hour.(2) It shall be a good defence to proceedings taken in respect of a contravention of paragraph (1)(b) to prove that- (a) the defect occurred in the course of the journey during which the contravention was detected; or (b) at the time when the contravention was detected steps had already been taken to have the defect remedied with all reasonable expedition. Cap 374A reg 25 Ability to reverse Every motor vehicle, other than a motor cycle, motor tricycle or invalid carriage, shall be capable of being driven both forwards and backwards. Cap 374A reg 26 Driver's accommodation (1) Every motor vehicle, other than a bus or light bus, shall be so designed and constructed that the driver- (a) has adequate room and can easily reach and quickly operate the controls; (b) while controlling the vehicle can at all times have a full view of the road and traffic ahead of the vehicle.(2) The driver's seat of every motor vehicle, other than a bus or light bus, shall be secured to the body of the vehicle and shall measure at least 380 millimetres from the backrest to the front edge of the seat and 380 millimetres along the back, except that where the vehicle is fitted with a continuous seat for a passenger or passengers beside the driver the space available for passengers under regulation 27 shall be measured from a point 380 millimetres from that part of the seat nearest to the centre of the steering wheel. (3) The driver's seat of every motor vehicle, other than a bus or light bus, shall be capable of being adjusted in relation to the steering wheel of the vehicle so that it can be moved from 350 millimetres to at least 450 millimetres from the steering wheel measured from the nearest point on the periphery of the steering wheel to the nearest part of the back of the driver's seat. (4) Subject to paragraph (5), the driver's seat of every vehicle shall be so placed as to permit the driver to give by hand the usual traffic signals on the right or off side of the vehicle. (5) The Commissioner may by permit in writing, subject to such terms and conditions and for such period as appears to him fit, authorize the use of a motor vehicle which does not comply with paragraph (4). Cap 374A reg 27 Passenger seating capacity (1) No vehicle shall be provided with seating capacity for passengers in excess of the seating capacity for that class of vehicle specified in the Third Schedule. (2) The seating capacity for passengers in a bus or special purpose vehicle shall be the seating capacity specified in the registration document issued in respect of that vehicle, and no bus or special purpose vehicle shall be provided with seating capacity in excess of the seating capacity so specified. (3) No seating capacity for passengers shall be provided in an invalid carriage, trailer, tricycle or pedestrian-controlled vehicle. (4) Subject to regulation 26, every seat in a vehicle shall be secured to the body of the vehicle and shall, except in the case of a bus or light bus, measure at least 380 millimetres from the backrest to the front edge of the seat and 380 millimetres along the back. (5) In calculating the seating capacity of a vehicle for the purposes of this regulation- (a) only those seats that are provided in accordance with paragraph (4) or regulation 73, as the case may be, shall be taken into account; and (b) no account shall be taken of any space on a seat which is less than 380 millimetres. Cap 374A reg 28 Safety glass or safety glazing (1) The glass or transparent material used in all windscreens, windows and partitions of a motor vehicle shall be safety glass or safety glazing- (a) of a type approved by the Commissioner; (b) of such transparency that it does not obscure the view of the interior of the motor vehicle; and (c) where practicable, clearly identifiable as safety glass or safety glazing by a permanent mark inscribed thereon.(2) No alteration or addition shall be made to any windscreen, window or partition referred to in paragraph (1) whereby the reflecting effect of the safety glass or safety glazing is increased, or whereby the ability of such safety glass or safety glazing to transmit light is decreased. (L.N. 203 of 1990) |
- 此法规有错误，我来纠正。请点击在此 提交错误内容或者您纠正的内容！