【法规名称】
【法规编号】 68863 什么是编号？
【正 文】
第8页 CAP 374A ROAD TRAFFIC (CONSTRUCTION AND MAINTENANCE OF VEHICLES) REGULATIONS
|
[接上页] (a) a vehicle designed for use and used solely in connection with street cleansing, the collection or disposal of refuse or the collection or disposal of the contents of gullies or cesspools; and (b) a goods vehicle so designed that it can dispose of its load by tipping to the rear provided the overhang does not exceed 1.2 metres. Cap 374A reg 9 Motive power (1) Subject to paragraph (2), every motor vehicle intended for use or used on a road shall be propelled by- (a) a positive-ignition engine; (b) a compression-ignition engine; or (c) an electric motor.(2) Notwithstanding paragraph (1), the Commissioner may approve in writing a motor vehicle powered by other means for use on a road if he considers the vehicle suitable for use on roads in Hong Kong. (3) Before granting approval in respect of a vehicle under paragraph (2) the Commissioner may require- (a) production of such plans and information; and (b) such test and inspection,as he considers necessary. Cap 374A reg 10 Power to weight ratio (1) Subject to paragraph (2), every motor vehicle first registered after the coming into operation of this regulation which is propelled by a compression-ignition engine shall be so constructed that the power that the engine produces is at least 4.4 kilowatts for every 1000 kilograms of the permitted gross vehicle weight of the vehicle. (2) Every motor vehicle to which paragraph (1) applies shall, where it is fitted with ancillary equipment designed for use or likely to be used when the vehicle is in motion on a road at a speed in excess of 8 kilometres per hour and the power absorbed by that equipment is provided by the engine propelling the vehicle, be so constructed that, when the ancillary equipment is being used, the power of the engine remaining available to drive the vehicle is at least 4.4 kilowatts for every 1000 kilograms of the permitted gross vehicle weight of the vehicle. (3) For the purposes of this regulation, "ancillary equipment" (辅助装备) means machinery or apparatus forming part of a vehicle or mounted thereon, used for purposes not connected with the driving of the vehicle. Cap 374A reg 11 Body The body of a vehicle shall be securely affixed to the chassis and every trap door in the floor of the vehicle shall be strong and so fitted or fastened that it cannot become dislodged by vibration, with any lifting device properly sunk. Cap 374A reg 12 Turning circle (1) Every vehicle shall be so constructed as to be capable of turning in either direction within a circle which has a diameter not exceeding- (a) 24.5 metres, in the case of a vehicle with an overall length of not more than 10 metres; and (b) 26 metres, in the case of a vehicle with an overall length of more than 10 metres.(2) For the purpose of this regulation, the diameter of the turning circle of a vehicle shall be determined by reference to the circle traced by the extreme projecting points included in the overall length and overall width of the vehicle. Cap 374A reg 13 Variation of wheel load (1) Subject to paragraph (2), every motor vehicle, trailer having more than 4 wheels and trailer having more than 2 wheels being part of an articulated vehicle shall be provided with such compensating arrangement as will ensure that all the wheels will remain in contact with the road surface and under the most adverse conditions will not be subject to abnormal variations of load. (2) Paragraph (1) shall not apply- (a) to any steerable wheel of a motor vehicle if the load on such wheel does not exceed 3.5 tonnes; and (b) with respect to any properly constructed retractable axle while in the retracted position. Cap 374A reg 14 Axle loading (1) Subject to paragraphs (2) and (3), the weight transmitted to the road surface by any one wheel of a vehicle where no other wheel is in the same line transversely shall not exceed 4.5 tonnes and the total weight so transmitted by any 2 wheels of a vehicle in line transversely shall not exceed 9 tonnes. (2) The total weight transmitted to the road surface by any 2 wheels of a vehicle in line transversely shall not exceed 10 tonnes if each such wheel is fitted with 2 pneumatic tyres having the centre of their areas of contact with the road surface not less than 300 millimetres apart measured at right angles to the longitudinal axis of the vehicle or with a wide tyre. (3) In the case of a vehicle having more than 2 wheels in line transversely, the total weight transmitted to the road surface by those wheels shall not exceed 11 tonnes. Cap 374A reg 15 Suspension (1) Subject to paragraphs (5) and (6), every motor vehicle and trailer towed thereby shall be equipped with a suitable and sufficient system of suspension between each wheel and the frame of the vehicle. (2) The system of suspension of any vehicle with 3 or more wheels shall be so designed and constructed that there is no excessive body sway. (3) The system of suspension including any damper units therein shall be maintained in an efficient condition. |
- 此法规有错误，我来纠正。请点击在此 提交错误内容或者您纠正的内容！